316L stanless steel Pipe Bend
Tip: Minkeb, Tee, Reducer, Cross, Kap
Daqs: 1/2"-60"
Ħxuna: Sch5s-Schxxs
Standard: ASME, MSS, ISO, DIN, JIS
| Isem tal-Prodott | CL600 900 1500 3000 azzar li ma jissaddadx SS304/304L 316/316L ASME ANSI BS DN 15-500 liwjiet |
| Materjal | azzar li ma jissaddadx 304/304L 316/316L |
| Kulur | illustrar kulur/iswed |
| Standard | DIN GB ISO JIS BA ANSI |
| Pressjoni | 150-3000lbs |
| Kisi | żebgħa sewda |
| Ippakkjar | każ tal-injam |
| Daqs | 1/2"-72" |
STAINLESS STEEL 316-316L
316/1.4401/UNS S31600
316L/1.4404/UNS S31603
Kompożizzjoni Kimika
Ni | Cr | Mo | Mn | Si | C | S | P | N | Fe | |
MIN | 10.0 | 16.0 | 2.0 | - | - | - | - | - | - | |
MAX | 14.0 | 18.0 | 3.0 | 2.0 | 0.75 | 0.03 | 0.03 | 0.045 | 0.1 | Bilanċ |
Proprjetajiet Fiżiċi
Temperatura, grad F | 70 | 212 | 932 | 1832 |
Koeffiċjent* ta' Espansjoni Termali, fi/fi grad F x 10-6 | - | 9.2 | 10.1 | 10.8 |
Konduttività Termali | 7.8 | - | - | - |
Modulu ta 'Elastiċità Dinamika, psi x 106 | 29 | - | - | - |
Densità: 0.285 lb/inch3
Proporzjon ta' Poisson: 0.3
Reżistenza Elettrika: 445 Ohm-circ mil/ft
Proprjetajiet Mekkaniċi
Proprjetajiet Tensili Rappreżentanti
Qawwa aħħarija tat-tensjoni, ksi | 75 |
0.2 fil-mija Yield Strength, ksi | 30 |
Titwil, fil-mija | 40 |
Ebusija MAX, Brinell | 217 |
Proprjetajiet tipiċi tat-tensjoni u tal-impatt
Temperatura, grad F | 70 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 |
Qawwa aħħarija tat-tensjoni, ksi | 82.4 | 75.6 | 71.1 | 71.1 | 71.1 | 68.4 | 50.7 | 30.7 |
0.2 fil-mija Yield Strength, ksi | 42.4 | - | - | - | 26.5 | 23.4 | 22.6 | - |
Charpy Impatt V-talja, ft-lbs | 65 - 100 | - | - | - | - | - | - | - |
It-tags Popolari: 316L stanless steel Pipe Bend, pajp liwja, pajp tal-liwja, minkeb tal-liwja, minkeb raduis twil
Ibgħat l-inkjesta
